 |
| BOB-7 All-in-one Water Ozonation |
| 2 g/hr from ambient air |
| | Features |  |
| |
| • | All in one system |
| |
- Feed gas preparation
- Ozone generation
- Ozone / water integration
|
| • | Compact weatherproof cabinet for outdoor installation |
| • | Simply connect to a water pump to produce ozonated water |
| • | Supplied with pressure gauge/switch and pump adaptor |
| |
| Applications |  |
| |
| • | Bottle rinsing |
| • | Disinfection of DI Water for industrial production processes |
| • | Cooling tower treatment up to 50 RT (Refrigeration Tons), equivalent to 600,000 Btu/hr or 175 kW |
| • | Water recycling |
| • | Aquaculture and aquarium |
| • | Swimming pool, Spa |
| • | Water storage |
| |
Specification
|
| BOB-7 |
|
|
All-in-one Ozonated Water Generator |
| Feed gas preparation, ozone generation, ozone/water integration, all in a compact weatherproof cabinet |
|
| Dimension |
205W x 190D x 480H mm |
| Weight |
12 kg |
| Ozone production |
2 g/hr |
| Ozone concentration in water |
0.6 ppm disolved in potable water for 500 litre/hour take-off |
| Water flow rate through BOB-7 |
1500 to 3000 litre/hour at 2 Bar g inlet pressure and no outlet back pressure |
| Cabinet construction |
Corona discharge. High frequency power supply, IGBT based |
| Ozone injector |
Stainless steel Venturi based integrated Coaxial Mixer |
| Feed gas |
Ambient air sucked in by vacuum |
| Principle of operation |
Venturi vacuum, no pressurized ozone |
| Ozone generation |
Corona discharge between quartz tubes with special coating High frequency power supply, IGBT based |
| Indicators |
LEDs for power on/off and ozone generation |
| Power consumption |
90 W |
| Cooling |
Internal, via process water flowing through Venturi |
| Water inlet/outlet connections |
1" thread, stainless steel |
| Water inlet pressure gauge |
Pressure gauge with electrical contact to interlock ozone production |
| Power supply requirement |
AC 220-240 V, 50/60 Hz, single phase |
| Certification |
CE and EMC certified |
| Warranty |
Complete system 2 years |
BOB-7 Installation |
| The BOB-7 should be installed downstream of an ozone resistant pump as follows: |
| Pump flow rate Q |
1.5 - 3 m³/hr |
| Pump outlet pressure |
2 bar g with BOB-7 outlet back pressure of < 0.2 bar g |
| Particle size |
< 100 µm |
| Suitable pump and pre-filter available on request |
Download .pdf version.
Printer friendly version
